How to Reset Canon iP1880, IP 1100, iP1800 and iP2500 series

24 Jun

Posted by admin | Tag: Canon Printers, Printers Resetter

This tutorial solutions to reset canon iP 1880 blinking. this way cannot to change ink level status canon pixma iP1880. following tutorial and software resetter to reset Canon Pixma iP1880.

Reset hardware

Press Resume button hold for 1 - 2 minutes
Open the cover
Release the catridge and then put catridge again
Close The Cover
Turn Off
then Turn On again

Reset Software

Download software resetter for canon pixma iP1880 : Download service tool for Canon iP1880
Driver should have been install correcly.
Connect USB cable.
Before connect power, press and hold power button then connect the power.
At the same time Hold power button, and press reject button for 2 times then release power button.
Run software resetter for canon iP1880.
Don’t forget to open lock release in the software. ( note : to view locK release menu, min resolution 1024 x 728)
Then select Set Destination to iP1880
Check CLEANING and EEPROM CLEAR
Click MAIN and PLATEN
Finally test print by click TEST PATTERN1.

Note : for permanent reset waste ink canon iP1880 Printers pls, resetting use software resetter. Above way can be used at canon IP 1100, iP1800 and iP2500 series

17 Responses to “How to Reset Canon iP1880, IP 1100, iP1800 and iP2500 series”

thanks man you helped me big time…

1
angel Says:
6 Jul 2008, 10:05 am
wen i open the generaltool, it says error22,the ports are not suported.what can i do?

2
dennis Says:
17 Dec 2008, 12:35 pm
i followed your procedures but my printer is still not working . my printer is saying that my cartridge are not installed properly ..

what should i do . ?

3
shEiyNne Says:
23 Dec 2008, 3:53 am
@shEiyNne, I have ben tested this methode to reset waste ink counter and worked perfecly. in your problem maybe the cartridge not intalled correcly

4
Fauzan Says:
23 Dec 2008, 12:59 pm
Thank’s

5
iroel Says:
28 Dec 2008, 2:11 pm
i’ve tried to reset with general tools but it’s not working at all… my printer still blinking… the light on resume button (orange) appear 5 times and the power (green) button appears 1 times…. and so just be like that… can u give me the solution???? By the way thanks…..

6
lie chien Says:
17 Mar 2009, 6:50 am
@Lie Chien, try iptool software, maybe it solve your proble.
download the software here
http://tricks-collections.com/download/

7
Fauzan Says:
17 Mar 2009, 11:17 pm
maturnuwun mas, thx

8
ocex Says:
22 Apr 2009, 2:50 pm
I had the problem of 5 orange blinks in my canon IP1800 I took out the power cable and plug it back while power bitton is pressed. Now I don’ thave teh orange blinks any more but when I try to print a document if do mothing
Please advise
thanks

9
Zachi Says:
23 Apr 2009, 7:48 pm
Please answer to this message so I wil get notificaiton by email

10
Zachi Says:
23 Apr 2009, 7:49 pm
afain, I forgot to check the check box

11
Zachi Says:
23 Apr 2009, 7:49 pm
@Zachi, Maybe any error in your cartridges, please read this article, I hope this artilce helpfull

http://tricks-collections.com/2009/04/led-error-code-for-canon-ip1300-ip1700-ip1200-ip1880%c2%a0ip1980/

12
Fauzan Says:
24 Apr 2009, 5:48 am
this didnt work for me.. my ink cartridges are at the correct place - as of what i can see - but then it still states that it’s not installed properly. I tried resetting and everything.. what should I do?

13
nadz Says:
7 May 2009, 10:20 am
My IP1800 run before, but now is blinking seven times (orange lamp). After I follow the instruction as follows, this didn’t work for me..:
1.Download software resetter for canon pixma iP1880 : 2.Driver has been install correcly.
3.Connect USB cable.
4.Before connect power, press and hold power button then connect the power.
5.At the same time Hold power button, and press reject button for 2 times then release power button.
6.Run software resetter for canon iP1880.
In this step, after the software came out, the software didn’t work..on the bottom screen there is:”wait a moment…” but nothing happen…
I couldn’t open lock release or anything else..
The cartridges are set up already. What should I do..?

14
budi Says:
17 May 2009, 9:50 am
I’ve tried to reset my ip1880 with hardware method but did not work, does software method waork well?

15
abusyafiq Says:
20 May 2009, 7:10 am
Hi Abusafiq, the software has tested and work

16
Fz Says:
20 May 2009, 11:08 pm
Salam kenal, sy puny masalh dgn print canon ip1880, tdk bisa d operaskn lg. Selalu muncul “absobter ink full”dgn image print bground merah gelap. Ap yg hrs sy lakukan agr sy dpt mngunakny lg. Ktny hrs d reset dmn sy bs mndptkn sofware nya ? Ats perhatiany say ucapkn trmksih. Adi d riau.

17
Adi Says:
31 May 2009, 3:18 pm