Tricks-Collections.Com

Reset Methode for Canon Printers i6100, i255, i320, i550, i560, i850, i860, i865, i950, i9100, i9950

Canon i255, i320 Waste Ink Counter Reset

Step 1 : Manual for service mode

1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

or Step 1: Manual for service mode

1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator LED should be green.
4. Press and release the RESUME button , the indicator LED should be orange.
5. Press and release the RESUME button again, the indicator LED should be green.
6. Release both buttons.

Step 2 : Software for Permanant

1. Reconnect the printer cable.
2. Download and Run General Tools software resetter for Canon printers i320, i255 then
3. select USB PORT
4. Choose SET DESTINATION 1 And it should be reset.

Remark “After service mode Pls use software for permanent reset”

Reset Procedures for Canon i550, i560, i850, i860, i865, i9100, i9950 Printers

1. Turn off Canon i550, i560, i850, i860, i865, i9100, i9950 Printers
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your Canon i550, i560, i850, i860, i865, i9100, i9950 Printers should respond as normal.

Canon i850, i950, Waste Ink Reset

1. Start with the printer OFF
2. Hold down RESUME and then hold down POWER
3. release RESUME
4. press RESUME twice, then release POWER
5. Let green light blink until printer is done futzing

Select function with RESUME press POWER to execute:

presses - light color - function

Reset Procedures Canon i6100

1. Turn off the printer
2. Press and hold RESUME button, then press and hold POWER button
3. Release the RESUME button
4. Next press and release the RESUME button two more times in succession, then release POWER button.
5. Press RESUME button for 4 times, this will select the clear waste ink counter function, The lamp will alternate color with each key press.

• 1. Service/Factory test printout, including ink sensor check.
  2. EEPROM - Info printout.
  3. EEPROM – Initialization.
  4. Reset the Waste ink counter.
  5. Printer model setting. (More selections beyond this point – However it is best leave them unaltered – You have been warned!)

Popularity: 1%

Related Posts

• Reset Counter Canon iP1500 and iP1000 (0)
• Waste Ink Tank Full Reset Canon i80 (0)
• How to Set-Up Continuous Ink System (CIS) in Epson T10, T11 and TX200 (2)
• Reset Waste Ink Counter Canon Pixma MP145 (0)
• Tips to Prevent Printed Pages Are Missing Lines or Streaky When Printing (0)
• Reset Canon Pixma Mp150, Mp160, Mp170, Mp180, Mp450 and Mp460 Using Mptool Software (1)
• How to Reset Canon Pixma MP110, MP130, MP190, MP450 (0)

This entry was posted on Monday, 23 June 2008 at 5:19 am by Fauzan and is filed under Category : Canon Printers, Printers Resetter .
You can Leave a response, or Trackback from your own site.