Tricks-Collections.Com

Maintenance Message Reset Methods for Lexmark Optra S, 2420, 2450, 2455, 3455, W810, Laser Printer 10R/10 Plus, 12 Series, 16 Series and Optra R L

Maintenance Message Reset Methods Optra S, 2420, 2450, 2455, 3455

1. Turn the printer off
2. Enter the Diagnostics Mode by holding down the GO and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST. When ready, the display will read PRINT REGISTRATION
3. Scroll to PRINTER SETUP and press the SELECT button
4. Scroll to MAINTENANCE PAGE COUNT and press the SELECT button
5. Scroll to RESET MAINTENANCE COUNT and press the SELECT button to reset the count to zero
6. Press the RETURN button to return to the Diagnostics Mode main menu, then exit Diagnostics Mode to return to normal mode

Maintenance Message Reset Methods for Lexmark Optra W810

1. Enter the Configuration Menu by holding down the SELECT and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST. After the self test the display will read CONFIG MENU
2. Press the right arrow side of the MENU button until MAINT. COUNTER is displayed
3. Press the SELECT button, then scroll to RESET TRANSFER or RESET FUSER and press the SELECT button again to reset
4. Press the RETURN button to return to the Configuration Menu and press the left arrow side of the MENU button to exit the Configuration Menu

Maintenance Message Reset Methods for Laser Printer 10R/10 Plus, 12 Series, 16 Series, Optra R L

1. Turn the printer off
2. Enter the Diagnostics Mode by holding down the READY and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST
3. Select MAINTENANCE COUNT
4. Select RESET to return the count to zero
5. Press the RETURN button to return to the Diagnostics Mode main menu, then reset printer to return to normal mode

Posted July 21st, 2008 | No Comments | Categories Lexmark Printers, Printers Resetter
You can Leave a comment, or Trackback from your own site.