Blog, Adsense, Resetter Printers, Windows

This tutorial solutions for canon iP 1880 blinking. this way cannot to change ink level status canon pixma iP1880. following tutorial and software resetter to reset Canon Pixma iP1880.

Reset hardware

1. Press Resume button hold for 1 - 2 minutes
2. Open the cover
3. Release the catridge and then put catridge again
4. Close The Cover
5. Turn Off
6. then Turn On again

Read the rest of this entry »

Canon PIXMA iP1000, iP1500 Waste Ink Counter Reset

Step 1: Manual for Service mode

1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

step 2 : Using Software Resetter for Permanant

1. Reconnect the printer cable.

2. Download

1. • General Tools software Resetter for canon Pixma iP 1500

   • General Tools software Resetter for Canon PIXMA iP1000 Printers

1. Run the Software Resetter and select (USB PORT)

2. Choose SET DESTINATION 1 And it should be reset.

Remark “After service mode Pls use software for permanent reset”

Canon Pixma iP1200, iP1600, iP2200 Resetter

1. Download software for Canon iP1200, iP1600, 2200 Printers.DOWNLOAD Service Tool Software for Canon Pixma Printer iP1200, iP1600, iP2200
2. Unzip downloaded file by WinZip, 7Zip, Izarc, etc
3. Run GeneralTool.exe
4. Select the connected USB port number from USB PORT
5. Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
6. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.

Read the rest of this entry »

Canon i255, i320 Waste Ink Counter Reset

Step 1 : Manual for service mode

1. Unplug power and USB.

2. Open door and hold power button.

3. Connect power.

4. Close door, then release power button.

or Step 1: Manual for service mode

1. Turn off the printer. And disconnect the printer cable.

2. Press and hold the POWER button, turn on the printer.

3. The indicator LED should be green.

4. Press and release the RESUME button , the indicator LED should be orange.

5. Press and release the RESUME button again, the indicator LED should be green.

6. Release both buttons.

Step 2 : Software for Permanant

1. Reconnect the printer cable.

2. Download and Run General Tools software resetter for Canon printers i320, i255 then

3. select USB PORT

4. Choose SET DESTINATION 1 And it should be reset.

Read the rest of this entry »