Tricks-Collections.Com

Canon i255, i320 Waste Ink Counter Reset

Step 1 : Manual for service mode

1. Unplug power and USB.

2. Open door and hold power button.

3. Connect power.

4. Close door, then release power button.

or Step 1: Manual for service mode

1. Turn off the printer. And disconnect the printer cable.

2. Press and hold the POWER button, turn on the printer.

3. The indicator LED should be green.

4. Press and release the RESUME button , the indicator LED should be orange.

5. Press and release the RESUME button again, the indicator LED should be green.

6. Release both buttons.

Step 2 : Software for Permanant

1. Reconnect the printer cable.

2. Download and Run General Tools software resetter for Canon printers i320, i255 then

3. select USB PORT

4. Choose SET DESTINATION 1 And it should be reset.

Read the rest of this entry »

Try it to Reset Canon Printers S300, S400, S450, S520, S600, S750, S820, S900, S9000 and S Series

Canon Printers S9000, S300, S400 Reset Procedures

1. Turn off Canon S300, S400, S9000 Printers

2. Hold down Resume button and press Power button.

3. Keep holding down Power button and let Resume button go.

4. Press Resume button 2 times then let BOTH buttons go.

5. Green lights will flash and then stop blinking.

6. When green lights are solid, press the Resume button 4 times.

7. Press the Power button and the printer should turn off, if not, press the Power button once more.

8. Your Canon S300, S400, S9000 Printers should respond as normal.

Canon Printers S520, S750, S820, S900 and any S Series Reset Procedures

1. Turn off the printer.

2. Press and hold the RESUME button, then press and hold the POWER button.

3. While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.

4. The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.

5. Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.

   1. Service/factory test printout, including ink sensor check

   2. EEPROM info printout

   3. EEPROM initialization

   4. Clear the waste-ink counter

   5. Printer model setting. (more selections beyond this- leave this alone)

6. After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.

Read the rest of this entry »

When refilling ink of cartridge PG-40 and CL-41 at Canon Printer Pixma iP 1880, ink level at cartridge do not become automatic full, but we have to do reset manual otherwise you change new PG-40 and CL-41 cartridges, you needn’t reset the cartridges.

There are some ways to reset of type Canon printers cartridge PG-40 and CL-41, one of the way to reset ink level cartridges PG-40 and CL-41, shall be as follows. Before you do reset you have to provide one of Canon Printers Cartridge PG-40 and CL-41 again.

Resetting level ink :

1. Tide of Cartridge Canon PG-40 and CL-41 (2nd) to Canon Printer Pixma iP1880 and let the cartridge detect untill finish. And try to test print.

2. After refill of cartidge canon PG-40 and CL-41 (1st), tide the cartidge PG-40 and CL-41 (1st) at printer and try test print again, usually the ink level status have full again. Otherwise succeed to try again.

Note : let easierly of first Canon Cartridges PG-40 and CL-41 i give the name (1st), and other Canon Cartidges PG-40 and CL-41 I give name (2nd).