Tricks-Collections.Com

How to Reset Canon Pixma iP90

Canon pixma iP90 released almost at the same time with canon Pixma iP 1880. Canon iP90 is printer with single function. Cartidges which used in canon Pixma iP90 is BCI-15BK, BCI-115C dan BCI-16C. Resetting procedure canon iP90 almost the same as manual reset canon iP1880. You can use combination of button in the printer to reset the printer.

Following step by step resetting canon Pixma iP90 :

• Before resetting printer canon iP90, start with printer power off .
• Press resume button coincide with power button.
• While pressing power button, release resume button.
• Press resume button 2 times and then release both button
• Green LED indocator will blinking and then stopped blinking.
• When the Power LED lights in green, press resume button 4 times.
• Press power button and the printer power will off. otherwise off, depress again power button.
• And the turn on the printer again, your printer canon iP90 should be response as normal.

Posted November 25th, 2008 | No Comments | Categories Canon Printers, Printers Resetter

Waste Ink Tank Full Reset Canon i80

This tutorial to reset waste ink in the printer canon i80. I not yet tried this tutorial, because this tutorial is I get from forum service printer. following step bt step to reset printer Canon i80 :

• Close the print head cover, and turn off the printer.
• While pressing the Resume/Cancel button, press the Power button *.
• While holding the Power button, release the Resume/Cancel button **.
• While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons ***. During initialization, the LED blinks in green.
• When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times ***.
• Press the Power button. The LED lights in green, and the selected function is performed. When the operation completes, the printer returns to the menu selection mode automatically.
• Power off the printer and then back on and test.

Continue Reading »
Waste Ink Tank Full Reset Canon i80

Posted November 23rd, 2008 | No Comments | Categories Canon Printers, Printers Resetter

How to Set-Up Continuous Ink System (CIS) in Epson T10, T11 and TX200

I posting tutorial installation Continuous Ink System ( CIS) in Epson T10, T11 and TX200 after there are question of visitor of this blog. This Tutorial can be used in Epson T10, T11 and TX200. Modify printer can cause printer error or damaged and cause warranty at your printer lose.

Step by step installation Continuous Ink Suply System (CISS) in Epson T10, T11 and TX200

• Turn off the printer, then move the cartridge carrier to the right side of the printer, and then take out the original cartridges.

• Use the screwdriver to remove the cover of the cartridge carrier. beware of when opening this cartridge cover.

Continue Reading »
How to Set-Up Continuous Ink System (CIS) in Epson T10, T11 and TX200

Posted November 15th, 2008 | 4 Comments | Categories Canon Printers, Printers Resetter