Tricks-Collections.Com

Reset waste ink pad counter epson CX7300, CX8300 and CX9300F use adjustment program. I have tried this software and this software worked. To run this software without error please follow the tutorial under. I have modified the bat file and I change the name tricks-collections.bat to assist when running program adjustment.

Here How to use this software :

• Download the adjustment program (see under)
• Extrak adjustment you have downloaded
• Go to The extrakded folder then click tricks-collections.bat file
• Now set the date setting in you PC to 11 April 2008,
• Run adjustment program by click AdjProg.exe file the click accept
• Click Particular adjustment mode then select destination and printer port then click OK
• Select Waste ink pad counter from the below window and double-click to execute it
• Click [Check] button to check current protection counter’s value.
• Then Click [Initialization] to reset the protection counter to the initial value. Thats all.
• After finishing, you can change the date to normal.

Read the rest of this entry »

Are you bored when running adjustment program for epson. The adjustment program always showing this message. This solution for the problem.

Before re-run adjustment program, follow this steps :

• Delete all folder in C:\Adjustment Program\

• delete all registry key in : HKEY_LOCAL_MACHINE | SOFTWARE | EPSON | PTSG |

• Then change the date setting at computer accord with adjustment program type

How to Know Date Setting of Adjustment Program

Read the rest of this entry »

Reset procedure for Epson C110 almost the same as reset Epson C90 or Epson C79. Date setting must be used in the PC for software resetter Epson C110 is 11 April 2008.

Before run resetter for epson c110, change date setting in your computer to run adjustment program for Epson C110 without error, its way :

• Click Start then select Control Panel. In control panel windows appears select date and time (classis view). If control panel in your computer is category view select “date, time, language, and regional setting” then select date and time, or to open date and time setting quickly double click the clock in the system tray (systray).
• Then change date setting in the computer to to 11 April 2008

Read the rest of this entry »