Resetting the Epson 9000's waste ink counter (to cure the 00000100 error code)
Press these three buttons while turning on the printer;
Paper Source, Paper Feed - (not +), Cut/Eject.
The LCD panel reads : INIT. ALL=EXEC.
Push the Paper Source button 9 times.
The LCD panel reads : INIT. WA. INK=EXEC.
Press Cut/Eject button to enter.
All lights on the printer control panel will turn...
Epson Stylus Pro 7600, 9600 Manual Counter Reset
Power off your printer
press PAPER SOURCE + PAPER FEED + CUT/EJECT buttons at the same time and keep them pressed
turn on the printer
Release the buttons
A hidden menu appears
press DOWN, "CLEAR COUNTERS" option should appear
press RIGHT
press UP, "MAINT TANK" should appear
press RIGHT
press ENTER (CUT/EJECT button)
Power...
Manual Reset Procedure for Epson Printers Stylus Pro 4000 to Reset Waste Ink Counter, following this steps :
While Powering up the printer, hold down the the left arrow, down arrow, and Up arrow buttons
You will get a "Self Testing" message.
Use the Up Arrow button to select the "Clear Counters" menu.
Press the right arrow button (the Menu button).
Scroll through with the up/down...
Here is how to reset the waste counter for the Epson R200, R210, R300 and R310 printers.
Press and hold "Stop", "Maintenance", and "Power" buttons for about 10 seconds. A message will come on the screen saying counter is reset and to turn the printer off. The R200 and others don't have a screen so just wait until the 10 seconds is up.
Turn the printer off, unplug the power cord. Wait...
Manual Reset Procedure for Printers Epson 2200
Turn off the printer power and unplug the power cord from the wall. Disconnect the computer interface cable at the back of the printer.
After one minute reattach the power plug to the wall, but don't reattach the computer cable.
Hold down the ROLL and the PAPER ADVANCE buttons simultaneously.
Turn the printer on. after 2 blinks, all the...
Copyright © 2008 - 2010 - Tricks-Collections.Com
proudly powered by WordPress - Tricks Theme by: Tricks-Collections.Com