Tricks-Collections.Com

Do you know used cartridge in your printer ?. if you don’t know see the answer here. Knowing type of cartridges will assist you searching tutorial service manual and resetter for your printer, to repair the problem of printer that you have. Sometime tutorial to service printer not mention type of printer but mention type of cartridges used.

Following some types of cartridge used a] printer :

Lexmark printers cartridges

Continue Reading »
What Cartridges Used in Your Printers

Popularity: 17%

To reset counter Canon PIXMA iX4000 or iX5000 you have to enter to service mode. Procedure to enter to service mode on Canon PIXMA iX4000 or iX5000 is as following :

1. Connect the Canon PIXMA iX5000 or iX4000 printer to the power cord. ( note : If the automatic power-on function is enabled in the printer, the printer enters the service mode for the first time, but it will never enter the service mode if the printer is turned off by the Power button. This is because the printer remains to be turned on internally if the power is turned off by the Power button. To prevent this, disconnection of the power cord is required before starting the printer in the service mode ) .
2. With the Canon PIXMA iX5000 or iX4000 printer powered off, while pressing the Resume/Cancel button, press and hold the Power button. (note : Don’t release the buttons. The Power LED lights in green to indicate that a function is selectable.)
3. While holding the Power button, release Resume/Cancel button. (Don’t release the Power button.)
4. While holding the Power button, press Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons.
5. When the Power LED lights in green, press the Resume/Cancel button 4 times to reset waste ink counter in the Canon Pixma iX5000 / iX4000. (note : If the Power LED does not light in green the printer does not enter the service mode, disconnect the power cord and plug it again. Then start from step 1 to start the printer in the service mode again).
6. At the end of the service mode, press the Power button. The paper lifting plate of the sheet feed unit will be raised.

Continue Reading »
Reset Waste Ink Counter Canon Pixma iX5000 and iX4000

Popularity: 34%

Sometime we like to change printer setting. often change of printer setting, possible in a moment we wish to return printer setting become default factory setting. If wishing to change printer setting to default factory setting usually have been provided in the manual book. Sometime in the manual book not be mentioned the way to reset printer setting to the factory default setting, or manual book of losing. To alter setting on HP Color LaserJet 2820 to default factory setting can follow intruction under. HP Color LaserJet 2820 All-In-One integrates a high-speed color printer, scanner and copier into one unit.

Procedure Restore Hp Color Laserjet 2820 To Default Factory Setting :

Continue Reading »
Restore to Default Factory Setting on HP Color LaserJet 2820 Printer

Popularity: 17%