You are here:

HP Laserjet 8000, 8100, 8150 Service Mode


How to enter service mode in HP Laserjet 8000, 8100, 8150

  1. Hold down SELECT and JOB CANCEL while powering on the printer, until all lights are illuminated and the Display is blank. (If the Display Panel reads INTERNAL TEST at this point, the keys were released too soon. Repeat this step until successful.)
  2. Press MENU, then SELECT. The message SERVICE MODE is displayed briefly, then the printer automatically begins an INTERNAL TEST. After several seconds, both Control Panel Indicators turn off. (The printer may display WARMING UP if it has not warmed up completely.) After the printer has warmed up and passed the self test, SERVICE MODE is displayed.
  3. Press MENU once to display SERVICE MENU.
  4. Once it says SERVICE MENU press ITEM to scroll through service mode items.
  5. To exit the Service Mode press GO.
Posted by Fz 1 Response

One Response to “HP Laserjet 8000, 8100, 8150 Service Mode”

  1. james says:

    i like the steps they were of assistant to me .james from kenya.


Leave a Reply to this Post

Recent Comments
  • Sudhakar: need reset utility for epson Tx720wd, if anyone have please...
  • excelive: powerful tools for old epson printer. thanks for...
  • nasir: in DCP t-300 it will not work.. is their any other procedure to rectify that...
  • jeff: The requested URL /download/10385082/ was not found on this...
  • nasir: very...