You are here:

Maintenance Message Reset Methods for Lexmark Optra S, 2420, 2450, 2455, 3455, W810, Laser Printer 10R/10 Plus, 12 Series, 16 Series and Optra R L

 

Reset Methods Optra S, 2420, 2450, 2455, 3455, Optra W810, Laser Printer 10R/10 Plus, 12 Series, 16 Series and Optra R L. I don’t know this reset method work or not on Lexmark printer because I not tested this reset methods. I found this reset methods on printer forum.

Here the Maintenance Message Reset Methods for Lexmark Optra S, 2420, 2450, 2455, 3455, W810, Laser Printer 10R/10 Plus, 12 Series, 16 Series and Optra R L

Maintenance Message Reset Methods Optra S, 2420, 2450, 2455, 3455

  1. Turn the printer off
  2. Enter the Diagnostics Mode by holding down the GO and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST. When ready, the display will read PRINT REGISTRATION
  3. Scroll to PRINTER SETUP and press the SELECT button
  4. Scroll to MAINTENANCE PAGE COUNT and press the SELECT button
  5. Scroll to RESET MAINTENANCE COUNT and press the SELECT button to reset the count to zero
  6. Press the RETURN button to return to the Diagnostics Mode main menu, then exit Diagnostics Mode to return to normal mode

Maintenance Message Reset Methods for Lexmark Optra W810

  1. Enter the Configuration Menu by holding down the SELECT and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST. After the self test the display will read CONFIG MENU
  2. Press the right arrow side of the MENU button until MAINT. COUNTER is displayed
  3. Press the SELECT button, then scroll to RESET TRANSFER or RESET FUSER and press the SELECT button again to reset
  4. Press the RETURN button to return to the Configuration Menu and press the left arrow side of the MENU button to exit the Configuration Menu

Maintenance Message Reset Methods for Laser Printer 10R/10 Plus, 12 Series, 16 Series, Optra R L

  1. Turn the printer off
  2. Enter the Diagnostics Mode by holding down the READY and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST
  3. Select MAINTENANCE COUNT
  4. Select RESET to return the count to zero
  5. Press the RETURN button to return to the Diagnostics Mode main menu, then reset printer to return to normal mode
Posted by Fz 1 Response
     

One Response to “Maintenance Message Reset Methods for Lexmark Optra S, 2420, 2450, 2455, 3455, W810, Laser Printer 10R/10 Plus, 12 Series, 16 Series and Optra R L”

  1. Bernard says:

    Really Interesting. Thanks for the Info. I love your site.

 

Leave a Reply to this Post

Jul
21
 
 
Friends
Recent Comments
  • Arc: I can't open file..message is "Can't create Process! Seach the file?" why?? i have...
  • ginrashid: need reseter for canon pixma p200 please...
  • ginrashid: i need reseter for canon pixma p200 please help...
  • ginrashid: i need reseter for canon pixma p200 .........
  • tokojubel: it's very hard work for making money online, but we must hard for promoting our site...