How to Reset Canon iP1880, IP 1100, iP1800 and iP2500 series

This tutorial solutions to reset canon iP 1880 or canon iP1800 series and work also in canon pixma iP1100, canon pixma iP2500. before reset using general tools you must reset the printer hardware. This way cannot to change ink level status canon pixma iP1880. following tutorial and software resetter to reset Canon Pixma iP1880.

Step 1: Reset hardware

Press Resume button hold for 1 – 2 minutes
Open the cover
Release the catridge and then put catridge again
Close The Cover
Turn Off
then Turn On again

Step 2: Reset Software using general tools

Download software resetter or general tools for canon pixma iP1880 : Download service tool for Canon iP1880
Driver should have been install correcly.
Connect USB cable.
Before connect power, press and hold power button then connect the power.
At the same time Hold power button, and press reject button for 2 times then release power button.
Run software resetter for canon iP1880.
Don’t forget to open lock release in the software. ( note : to view locK release menu, min resolution 1024 x 728)
Then select Set Destination to iP1880
Check CLEANING and EEPROM CLEAR
Click MAIN and PLATEN
Finally test print by click TEST PATTERN1.

Note : for permanent reset waste ink canon iP1880 Printers pls, resetting use software resetter. Above way can be used at canon IP 1100, iP1800 and iP2500 series

26 Responses to How to Reset Canon iP1880, IP 1100, iP1800 and iP2500 series

angel

July 6th, 2008 at 10:05 am

thanks man you helped me big time…

dennis

December 17th, 2008 at 12:35 pm

wen i open the generaltool, it says error22,the ports are not suported.what can i do?

shEiyNne

December 23rd, 2008 at 3:53 am

i followed your procedures but my printer is still not working . my printer is saying that my cartridge are not installed properly ..

what should i do . ?

Fauzan

December 23rd, 2008 at 12:59 pm

@shEiyNne, I have ben tested this methode to reset waste ink counter and worked perfecly. in your problem maybe the cartridge not intalled correcly

iroel

December 28th, 2008 at 2:11 pm

Thank’s

lie chien

March 17th, 2009 at 6:50 am

i’ve tried to reset with general tools but it’s not working at all… my printer still blinking… the light on resume button (orange) appear 5 times and the power (green) button appears 1 times…. and so just be like that… can u give me the solution???? By the way thanks…..

Fauzan

March 17th, 2009 at 11:17 pm

@Lie Chien, try iptool software, maybe it solve your proble.
download the software here
http://tricks-collections.com/download/

ocex

April 22nd, 2009 at 2:50 pm

maturnuwun mas, thx

Zachi

April 23rd, 2009 at 7:48 pm

I had the problem of 5 orange blinks in my canon IP1800 I took out the power cable and plug it back while power bitton is pressed. Now I don’ thave teh orange blinks any more but when I try to print a document if do mothing
Please advise
thanks

Zachi

April 23rd, 2009 at 7:49 pm

Please answer to this message so I wil get notificaiton by email

Zachi

April 23rd, 2009 at 7:49 pm

afain, I forgot to check the check box

Fauzan

April 24th, 2009 at 5:48 am

@Zachi, Maybe any error in your cartridges, please read this article, I hope this artilce helpfull

http://tricks-collections.com/2009/04/led-error-code-for-canon-ip1300-ip1700-ip1200-ip1880%c2%a0ip1980/

nadz

May 7th, 2009 at 10:20 am

this didnt work for me.. my ink cartridges are at the correct place – as of what i can see – but then it still states that it’s not installed properly. I tried resetting and everything.. what should I do?

budi

May 17th, 2009 at 9:50 am

My IP1800 run before, but now is blinking seven times (orange lamp). After I follow the instruction as follows, this didn’t work for me..:
1.Download software resetter for canon pixma iP1880 : 2.Driver has been install correcly.
3.Connect USB cable.
4.Before connect power, press and hold power button then connect the power.
5.At the same time Hold power button, and press reject button for 2 times then release power button.
6.Run software resetter for canon iP1880.
In this step, after the software came out, the software didn’t work..on the bottom screen there is:”wait a moment…” but nothing happen…
I couldn’t open lock release or anything else..
The cartridges are set up already. What should I do..?

abusyafiq

May 20th, 2009 at 7:10 am

I’ve tried to reset my ip1880 with hardware method but did not work, does software method waork well?

May 20th, 2009 at 11:08 pm

Hi Abusafiq, the software has tested and work

Adi

May 31st, 2009 at 3:18 pm

Salam kenal, sy puny masalh dgn print canon ip1880, tdk bisa d operaskn lg. Selalu muncul “absobter ink full”dgn image print bground merah gelap. Ap yg hrs sy lakukan agr sy dpt mngunakny lg. Ktny hrs d reset dmn sy bs mndptkn sofware nya ? Ats perhatiany say ucapkn trmksih. Adi d riau.

jesy

July 19th, 2009 at 3:50 am

i have done the methods published on the different site but it still doesn’t work..what should i do? someone kindly help me please…when i run the general tool software the program was not responding…
tnx for the help

jesy

July 19th, 2009 at 3:51 am

my printer is canon iP1880

July 19th, 2009 at 11:35 pm

@Jesy, solution for your problem, before doing reset software you must reset reset the hardware your canon iP1880

raihan

August 9th, 2009 at 11:45 am

tolong cara mereset printer caon IP1880 Series yang suka blinking

ip1880 owner..

October 20th, 2009 at 12:39 am

this works for me.. Thanks for posting this my friend.. you are a big help.. thanks and God Bless you..

peter

October 28th, 2009 at 10:18 pm

salut ! am o imprimanta canon ip 1800 nu mai functioneaza in sensul ca se aprinde si se stinge pe rand ledul verde si cel galben. ce e de facut ? cine ma ajuta si pe mine

November 1st, 2009 at 12:49 pm

thanks it’s work god bless u

anisthoha

December 28th, 2009 at 1:29 pm

trims,berhasil………nice post

master007

January 10th, 2010 at 6:20 am

can not print any document on my canon ip1880 even after doing print head allignment,nozzle print and even resetting ink levels…what could be the problem???….please help me!!