You are here:

Reset Waste Ink Counter Epson Stylus Photo RX640 Using Software Resetter

 

Software can be used to reset Epson Stylus Photo RX640 there is two. You can use adjutment program for Epson Stylus Photo RX640 or using SSC service utility, because sscserve v 4.30 support this printer.

Resetting Using Adjustment Program Epson Stylus Photo RX640

Important, before run adjustment program for Epson Stylus Photo RX640, aler date setting in the pc to 23 januari 2007. Date setting is needed to run adjustment program for Epson Stylus Photo RX640 without error.

  • Download and run adjutment program for Epson Stylus Photo RX640 by clicking AdjProg.exe and then Select particular adjustment mode.

  • Select usb port where printer Epson Stylus Photo RX640 installed

  • Select waste ink pad counter then click Ok
  • Click initialization button and the Epson Stylus Photo RX640 should be reset

Resetting Using SSC Service Utility

  • Download and install SSCServe.
  • Run SSC Service Utility and change the seting to rx640 and then close the windows setting.
  • Right click SSC Service Utility icon in the systay to view the menu.
  • Select protection counter and then select reset protection counter to reset the counter become zero.

Note : after resetting the printer turn off the printer and turn on again.

Posted by Fz 7 Responses
     

7 Responses to “Reset Waste Ink Counter Epson Stylus Photo RX640 Using Software Resetter”

  1. kamal says:

    adjustment programme for epson tx700w

  2. Dale McGeorge says:

    I downloaded the rx640 program but was unable to open it. In the Google search heading it says this will work for an Epson TX700W printer, but there is no reference to my series of printers in the article. What’s up?

  3. Fz says:

    @Dale McGeorge, you can download software resetter for your printer here: resetter epson TX700W

  4. Mujib Sakhizada says:

    Dear All I have Epson Stylus photo P50, my printer have problem when I print a paper I must to restart sevrial time to print that paper I don’t know what should I do. please advice me what should I do in this case.

    thanks

    Mujib Sakhizada
    From Afghanistan Kabul

  5. andrea says:

    Adjustment Program Epson Photo RX640 !!! ERROR !!! this program cannot be used!!! I have even set the date of my PC back to January 23 2007, still does not work. I have tried under win7 and also under winxp, still does not work!!! Hope you can help, Andrea

  6. Rohtash says:

    we have a p50 rester

 

Leave a Reply to this Post

Dec
12