How to Reset Printers Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970
Reset Printer Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970
- Turn off the printer
- Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.
- Hold the Power Button, release the Resume Button.
- Not releasing the Power Button, double click “Resume” and release Both Buttons.
- Click “Resume” for Four times
- Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.
Baca Juga Artikel Ini
- How to Reset Canon Pixma MP110, MP130, MP190, MP450 (0)
- Reset Canon iP1880 (1)
- Resetter Printers Canon Pixma iP1000, iP1200, iP1300, iP1500, iP1600, 1700, ip1880, iP2200, iP3000, iP4200, iP5200 (0)
- Reset Methode for Canon Printers i6100, i255, i320, i550, i560, i850, i860, i865, i950, i9100, i9950 (0)
- Reset Procedures for Canon Printers S300, S400, S450, S520, S600, S750, S820, S900, S9000 and S Series (0)
- Reset Ink Level Cartridges PG-40 and CL-41 in Canon Pixma iP 1880 (0)
- Methode Reset Waste Ink Counter for Canon Printers BJC series (0)
This entry was posted
on Wednesday, April 9th, 2008 at 8:54 am and is filed under Printers Resetter and Service Manual.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
April 28th, 2008 at 7:44 am
MP470 Canon Printer
You can disable the “NO INK” warning by pressing and holding the Stop/Reset (red triangle in circle) button for more than five seconds.
June 30th, 2008 at 11:09 pm
On my MP210, I changed the color cadride with a refilled on, and tried your manipulation but it didn’t make it:
After pressing 4 times “Resume” and then “start” once, it did nothing. When I pressed “start” again, the printer printed “D=0.000 Ps=0.003″ and did not shutdown after.
When I finally shutted it down, the light for the color cadrigde was still on.
I also tried pressing “Resume” 1 to 3 times:
1 Time: Printed a bigger report with some color lines
2 Times: Printed an even bigger report containing among other informations the raw EEPROM information in hexadecimal),
3 Times: The printer shutted down, and when I turned it on, both black ink and color ink warnings were blinking for a while, and then only the color one remained :(.
Though, I can print (even before I tried these manipulations), but even black and right pictures seems to be a little red-colored, and I though it was due to the fact that the low color ink warning was ON.
Thank you if you can help me.
July 25th, 2008 at 4:20 pm
How to Reset Printers Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970
Donloaded I need