You are here:

Resetter Epson Stylus Photo R220 and R230

 

Before run adjustment program or software resetter Epson Stylus Photo R220 and R230, set date setting in your computer to 12 January 2006. Appearance of adjustment program Epson stylus photo R220 and R230 like adjustment program for Epson C45. Your Epson Stylus Photo R220 and R230 must be installed correctly in your computer before using the software otherwise so this software resetter will not be used.

Epson R220 and R230 using 6 Individual Intellidge Colour Ink Cartridges and this printer designed for photo printing. This printer has a very high resolution up to 5760 x 1440 dpi and allows photo quality printing.  It has parallel and USB interface to connected to computer and its compatible with Windows 98, Windows 2000, ME Windows XP and Macintosh.

Epson-Stylus-Photo-R230

Here how to Reset Epson R220 and R230 using the software

  • Download and extract downloaded software and run it.
  • Click accept button.
  • Set model name, port selection and destination setting and equal to your printer.
  • Click Maintenance Tab.
  • Check mark waste ink pad counter.
  • And the clear the protection counter (reset counter to zero)
  • Then click Ok, Ok
  • done

Download Adjustment Program Epson R220 – R230

Updated

If this software not work, you can also use SSC software to reset printer Epson R220 and Epson R230. the newest version of SSC software  (SSC ver 3.40) support for this printers.

Posted by Fz 51 Responses
     

51 Responses to “Resetter Epson Stylus Photo R220 and R230”

  1. nara says:

    hI need an adjustment program for my epson stylus c45.
    Anyone u help me?
    Thanks..

  2. Fauzan says:

    @nara, download the software in the download page above, tutorial to reset this printer can be found in this blog

  3. gracey says:

    hi…

    please help me reset my printer epson stylus r210…

    need it badly… thanks

  4. Mark says:

    any one have software for epson T10 (Printer Resetter) i need it badly pls. tnkz…

  5. rajeev says:

    i reset my printer r230 please sent resettin setup to my e mail id vickey123@yahoocom

  6. Fauzan says:

    @Rajeev, please download software resetter R230 in the download page above

  7. Manpreet says:

    please Any one send Me The Resetter Software For Epson R230 Inkjet Printer Thankx Please Send It Fast

  8. saisas says:

    I need an adjustment program for my epson stylus r230.
    Anyone can help me?
    Thanks..

  9. udin says:

    resetter epson stylus photo R230 please

  10. pavan says:

    pls let me know where ican get r230 printer adjustment program

    ineed it immediately
    pls do needful

  11. anil says:

    i need an adjustment program for my epson stylus r230.

  12. Fz says:

    @anil, you can download the software from following link: http://www.mediafire.com/?9njmgwlxqgj

  13. ajay says:

    Hy…
    I need an adjustment program for my epson stylus r230.
    Anyone can help me?
    Thanks..

  14. Huny says:

    I already downloaded from
    http://www.mediafire.com/?9njmgwlxqgj, but when I open the file APSPR220230_Ver12.exe, message error appear “Error” This program cannot be used…
    Please help. sent it to my email please.
    Thanks

  15. Fz says:

    @Huny, set date setting in your computer before use this program (set to 12 January 2006).

    to prevent error again read this article http://tricks-collections.com/tips-using-software-resetter-for-epson-printer-without-change-date-setting/

  16. samvoy says:

    Is there a way to use the used ink in the waste tank rather than throwing the ink away? In other words, can i re use the ink? Thanks

  17. Graham says:

    With the PC date reset to 12/01/2006 and the R230 printer switched on and ready to print, the reset program does not run – get error message “Error” “This program cannot be used.” replacing a first dialog panel/message? that is shown too briefly to read. What is wrong?

  18. reaj says:

    Epson R230
    “Error”Chip not detected!
    what is wrong?

  19. Fz says:

    @reaj, maybe your cartridge dirty or broke. cleaen the chips or replace with new cartridge chips

  20. James Craig says:

    “Error”Chip not detected!
    I get the same with my R220 for all chips.

  21. Noman says:

    Two red lights are lighting. How can I reset. May I have to download any software from internet? what’s the free website?

  22. sunil k n says:

    With the PC date reset to 12/01/2006 and the R230 printer switched on and ready to print, the reset program does not run – get error message “Error” “This program cannot be used.” replacing a first dialog panel/message? that is shown too briefly to read. What is wrong?

  23. Shannon says:

    Thanks so much for this! I was able to restore my Epson R220 after over a year of lost hope for this little guy (tried the link for the R220-230 first and kept getting a message about a missing DLL – perhaps because I was trying to use the program under Vista). Anywho! Thanks for coming to my rescue!!! You’ve saved another person a lot of money and kept my our landfills a little less full. May the Bird of Happiness really lay it on you!

  24. neelesh says:

    plese give a solution of get error message “Error” “This program cannot be used for r230

  25. Fz says:

    @neelesh, maybe this tutorial can solve your problem run adjustment without error

  26. Rocham says:

    With the PC date reset to 12/01/2006 and the R230 printer switched on and ready to print, the reset program does not run – get error message “Error” “This program cannot be used.” replacing a first dialog panel/message? that is shown too briefly to read. What is wrong?

  27. Vivian says:

    I need an adjustment program for my epson stylus r230.where can I find the tutorial section

  28. Fz says:

    @Vivian, please read this article for tutorial reset epson R230: http://tricks-collections.com/resetter-epson-stylus-photo-r220-and-r230/

  29. Azam says:

    Thanks a lot for the soft. I was in badly need of it. Now hope it will work. Thnx again

  30. joven says:

    how can i fix cx7300 red light is on but not blinking is steady only please help me thnks

  31. Fz says:

    @ joven, I think you need to reset the chip’s cartridge of the printer. Unfortunately adjustment program can not be used to reset the chip cartridge on Epson printer.

  32. EJNA says:

    hi.
    I’ve reached the counter limit, my counter reads 101% usage so a my printer needs service for recounter….which is painstaking because I have to bring it to the technician. Unfortunately our technician wont be available for one week and I can’t afford to wait too long for the service. Thankfully I stumble upon a forum and saw a post that directed me to this link. Thank you so much it worked!!! no sweat at all.

  33. zolkapeli says:

    If anyone can help me to get manual printer epson stylus r230 because i need to open casing to some spring have broken inside

  34. rasel says:

    Pls help me how to solv reset chip.

  35. zainal says:

    hloo I need an adjustment program for my epson sx415

  36. poms says:

    I am installing the software for R230, it is giving error “This program cannot be used”. I had setted the date to 12 Jan 2006.. pls help.. ;)

  37. Fz says:

    @poms, after the error appear you must delete some file and entry that created by the software before run the software again. Maybe this tutorial can solve your problem: http://tricks-collections.com/run-adjustment-program-epson-printers-whitout-error-version/

  38. Hazel Camacho says:

    It worked! Thanks a lot!

  39. jane says:

    help my printer did not work
    too much love will kill you..oh yeah

  40. Albert says:

    Thanks a lot. I’ve fixed my printer through this software. I found that this software does not work with Windows 7, so I changed my OS to Windows XP. More power.

  41. hery says:

    help me, my printer did not work. there’s red signal in ink and paper buttom.

  42. Riez says:

    The exe file has contain a backdoor, be careful!!!

    Here’s the proofs:
    _ttp://img17.imageshack.us/img17/7097/20101128142606.png
    _ttp://img641.imageshack.us/img641/3959/20101128142638.png
    _ttp://img543.imageshack.us/img543/9042/20101128142904.png

    and this is the clean version:
    http://www.mediafire.com/?j6uldxlbn3uu4d3

    Virus Total Result: _ttp://goo.gl/5LPil

  43. PANKAJ KUMAR says:

    Printer Model – R230
    Waste Ink Pad Counter Reseted to 0 (Zero) successfully.
    After Restarting the printer it is blinking both the Red lights on both left buttons.
    On Clicking get status – it is showing Fatal Error.
    Kindly help.

  44. Surya Prakash says:

    My epson r 230 is showing that it is in service mode and that the printer it is blinking both the Red lights on both left buttons and is not printing kindlly provide me necessary information as to what to do in this regard and how to overcome this repeated service massage.

  45. jillian says:

    I need help, i cannot reset the waste ink pad counter to zero. when i adjust, it gives an error “This program cannot be used”, what should i do…? Please help. Thanks

  46. Fz says:

    @Jillian, try this method to solve your problem: This program cannot be used solution

  47. Sushil says:

    hi i cant use this because after change the date is not work i wont this just for use head adjustment. plz help me

    THANKS

  48. Fz says:

    @Sushil, Read the tutorial here: run epson resetter without error
    I hope this tutorial can solve your problem

  49. akki says:

    I need help, i cannot reset the waste ink pad counter to zero. when i adjust, it gives an error “This program cannot be used”, what should i do…? Please help. Thanks

  50. jpr says:

    first to change the date to 12 january 2006 then you start the adjesment programme for epson r230

  51. jpr says:

    first to change the date to 12 january 2006 then you start the adjesment programme for epson r230

    still it gives an error “This program cannot be used”,

    do it

    C:\Adjustment Program\SPR220230 delete the file then follow the adjusment programme

Trackbacks/Pingbacks

 
Jan
29
 
 
Recent Comments
  • Aeneas Williams: Remo Recover is also an advanced utility to recover lost or deleted data from...
  • JR: Worked Perfect!!...
  • Download Driver: ternyata bisa reset printer sendiri thanks sob...
  • hussein: Hi all ... Thank you very much my printer epson 1410 has been reseted. Hope more...
  • jacqueline crockett: does not...